QtCAM
See3CAM_80 User Manual
12-Nov-15
www.e-consystems.com
|
Subject to change without notice
Page 22 of 30
7.5 Display Current frame rate achieved
Current frame rate achieved per second: - Frame rate will be affected by various environmental
parameters. It is displayed all the time [Just above “About” option].
7.6 Extension Settings
On selecting the Extension settings tab, the extension control will appear, if the device supports
extension unit. The See3CAM_80 camera has some additional controls and features and these
are not quite common controls and hence they are not included in the standard UVC controls, but
Listed as Extension controls.
The Extension settings tab is used to select these extended HID controls of See3CAM_80. It can
be used to apply three focus modes, read focus position, control three General Purpose I/O pins
and select the flash and torch modes. This can be done by clicking the appropriate controls of the
Extension Menu.
7.6.1
Focus Controls
The three Focus modes supported in the Extension Unit are:
1.
Auto Focus (Continuous)
2.
Manual Focus
3.
Single Trigger Focus
