![background image](http://html.mh-extra.com/html/e-con-systems/e-cam50_cu96/e-cam50_cu96_getting-started-manual_517937010.webp)
© Copyright e-con Systems. 2020. All rights reserved.
2.
Connect Pin 1 of CN4 connector with Pin 1 of high speed camera interface
connector and Pin 1 of CN5 connector with Pin 1 of low speed camera Interface
connector.
The ROCK960 development board with e-CAM50_CU96 base board is shown in
below figure.
Figure 8: ROCK960 Development Board with e-CAM50_CU96 Base Board
3.
Interface the adaptor board to the base board using the supplied 30 cm micro-
coaxial cables.
The supplied micro-coaxial cable is shown in below figure.
Figure 9: Micro-Coaxial Cable
4.
Connect the one end of micro-coaxial cable to the CN2 adaptor board connector
as shown in below figure.