E-Collar Technologies Pro Educator, Owner'S Manual

Page: 8 / 17

BUTTON ASSIGNMENT FOR THE DIFFERENT DOG MODES
The 4 Control Buttons S1 through S4 will be assigned to the selected dog
pursuant to following Table:
Control
Buttons
Stimulation Button Assignment Table
1 Dog Mode 2 Dog Mode 3 Dog Mode
S1-Button Dog 1 Dog 1 Dog 1
S2-Button Dog 1 Dog 2 Dog 3
S3-Button Dog 1 Dog 1 Dog 1
S4-Button Dog 1 Dog 2 Dog 2
Before you go further select the dog mode; 1 Dog or 2 Dog or 3 Dog modes
PROGRAMMING CONTROL BUTTONS AND FACTORY DEFAULT
SETTINGS
You can assign any 1 of the 9 functions to the S1, S2, S3 and S4 control buttons.
How to Program Control Buttons:
1. Press “P” button for more than 1 second until the LCD is flashing and
is displayed.
2. Press the “S1” button repeatedly until you arrive at the function you desire for
the “S1” button.
3. The default setting is “V” for the “S1”, the sequence is as follows :
( V ▶ T ▶ M ▶ M+ ▶ C ▶ C+ ▶ R ▶ R+ ▶ I )
* Note : The “Lock and Set” feature is accomplished by selecting “M” or “C”
mode and holding the “S1” button for one second before releasing it. Releasing
it too soon will toggle to the next mode. The Dog 1 icon will change to solid
when level is locked. Flashing Dog 1 icon indicates stimulation level will
determined by the volume/stimulation dial.
4. Repeat the same sequence for the S2, S3 and S4 buttons.
**** IMPORTANT NOTICE ****
Sometimes in the multi-dog mode the user needs to recall the settings and/or
stimulation level setting of a particular dog because the display always shows the
last dog stimulated. Simply enter the programming mode and push the
particular control button you want to recall the setting for, the first push will not
change that setting.
5. Press “P” at any time in the programming to return to active use of the
training collar.
Factory Default Setting
Control
Buttons
Factory Default Setting
1 Dog Mode 2 Dog Mode 3 Dog Mode
S1 1D Momentary 1D Momentary 1D Momentary
S2 1D Continuous 2D Momentary 3D Momentary
S3 1D Vibration 1D Vibration 1D Vibration
S4 1D Tone 2D Vibration 2D Momentary
Turn on the collar receiver(s) and test each one to make sure everything is
working, use the test light to test the stimulation or the palm of your hand at
levels no greater than 20, users with dry hands should test it on their forearms.