STEP 2: (a) Place the four quarters of the footrest on a smooth soft surface with the screw pockets facing up and the
marked ends together. (b) Fasten the four quarters together using the 2” stainless steel round head screws provided and
set off to the side.
(a)
(b)
STEP 3: (c) Place the chair legs and brackets on a smooth soft surface. (d) (x2) Fasten the chair legs to the leg brackets
using the 3” stainless steel flat head screws provided. Leave these loose so the foot rest can be slid on later. (e) Place
the two assemblies together. (f) Slide the footrest over the legs with the screws pockets facing down and position it in
the notches in the legs making sure to position the seam of the footrest on the center of the leg. (g) Tighten the 3”
stainless steel flat head screws from (d). (h) Flip the assembly over and fasten the footrest to the legs using the 3”
stainless steel flat head screws provided. (i) Attach the swivel to the leg assembly, making sure that the side that says
Bottom is facing down. (j) Fasten the swivel using the 1 ¼” stainless steel lags provided thru the holes provided. It is
easier to put all four lags in before tightening any of them completely. Place this assembly off to the side.
(c)
(d)
Summary of Contents for ACADIA BAR HEIGHT SWIVEL CHAIR
Page 3: ...e f g h i j...
