E.C.A. FELIS Series, Installation And User Manual

Page: 22 / 48

19
DATE / TIME SETTINGS
Ensuring that the date and time setting of your appliance is right is essential for time programs and
summer/winter changeovers to work correctly. When in the main screen press OK to enter the
menu, and enter the “Time of day and date” submenu to change the date / time setting and
summer/winter changeover dates.
When in main screen, press OK to enter the menu and navigate to “Time program Heating circuit-1”
submenu. Parameter no. 500 decides the day range for the time program and parameters
501-506 decides the times of the day for the heating to switch on and off. You can see the
arranged time program as a line chart in the bottom of the LCD screen.
TIME PROGRAMS
You can program the desired time slots for the appliance to run from the control panel. These settings
can be done for weekdays (Mon-Fri), weekends (Sat-Sun), all week (Mon-Sun) or seperate for each day.
For each day you can assign three start and three end times. The appliance will work according to the
Comfort setpoint during programmed time slots and it will work according to the Reduced setpoint
outside of programmed time slots.
Figure 13. Date / Time Setting
Figure 14. Time Programs