Operating Instructions|
GB
. Cleaning
Only use a slightly moist cloth to clean the case surface of the
set. Ensure when cleaning that no moisture enters the set
.
The
inside of the CD compartment must only be cleaned
with a clean, dry brush
(e.g. lens brush available from pho-
tographic dealers).
NEVER moist clean the inside of the CD
compartment!
Warning!
Moisture penetrating the set can give rise to
the danger of an electric shock!
Only clean the laser scanning lens
inside the CD compart-
ment (if necessary) with a
clean
,
dry brush
.
NEVER touch the
laser scanning lens with bare hands!
Please note!
Only clean the laser scanning lens
inside the CD compart-
ment (if necessary) with a
clean
,
dry brush
.
NEVER touch
the laser scanning lens with bare hands!
. Functional faults
Proceed in the following manner in the event of
functional
faults of the set
…
• First
disconnect the plug from the mains socket
or
remove
the batteries from the battery compartment
.
•
Check
that there is
at least 10 cm space above, behind and
on either side of the set in relation to walls or objects.
If this is not the case
, then
switch off the set
and allow it
to
cool down for at least one hour! Relocate the set in
such a manner that the above minimum distances are
observed
.
•
If audio CD playback is faulty or does not function at
all,
then this can indicate that a
film of condensation has
formed on the laser scanning lens
in the CD compart-
ment.
This can happen if the
set has been exposed to wide tem-
perature fluctuations
.
In this event place the
set in a dry environment with a
normal room temperature
and
wait at least five hours
before switching on the set again
.
Manual_KH2242_EN
16.09.2003, 15:04 Uhr
15
