13
f) Azimuth setting:
The cartridge needle must be perpendicular to the record in order to trace the groove wall
modulations correctly.
The azimuth (angle) is set precisely by the factory. In the event that you need to modify this
setting, however, follow the instructions below.
Loosen the small AZIMUTH SET SCREW,
using the supplied 1.5 mm hexagonal key.
DO NOT REMOVE THE AZIMUTH SET SCREW COMPLETELY!
Loosen the screw just enough to be able to gently rotate the arm tube and set the azimuth to the
correct position.
The correct position can be checked from the front view, preferably with the
needle placed on a mirror placed on the platter. Once the azimuth setting is correct, gently re-
tighten the AZIMUTH SETTING SCREW.
Examples of incorrect azimuth setup:
Too much left angle:
Too much right angle:
The correct position is 100% perpendicular to the record.
Summary of Contents for B-Sharp
Page 1: ...B Sharp Turntable USA Version 4 0...
Page 6: ...6...
