background image

In the box

Vacuum cleaner

Wand

Dyson omnidirectional 

Fluffy™ cleaner head

Engineered for hard floors. 

Glides in all directions - 

forwards, backwards,  

even sideways.

Charger

Charges your vacuum 

with or without a dock.

Combination tool

Two tools in one – wide 

nozzle and brush, 

for quick switching 

between cleaning and 

dusting tasks around 

your home or car.

Mini motorised tool

Motorised brush bar, 

concentrated in a 

smaller head to remove 

stubborn dirt from 

mattresses, upholstery 

and stairs.

Worktop tool

Engineered for 

cleaning kitchen 

worktops, tables and 

hard surfaces.

You can buy additional tools at www.dyson.com.

Main body 

showing the 

handle and 

bin attached.

The narrow connector end at the top, this connects 

to the bin and the wider end at the bottom that 

connects to the cleaner head or tool.

The charger is a one 

piece unit with the plug, 

connector end and cable.

This tool is angled 

and has a nozzle 

end.

A small cleaner head 

with a body housing the 

motor and an electrical 

connector to attach to 

the wand or directly to 

the machine.

This tool has a 

combination of brush 

head and crevice tool 

together in one unit. 

The brush head slides 

down the crevice tool 

when needed.

The Dyson omni-

directional Fluffy™ 

cleaner head with two 

brush bars and the 

connector end pointing 

upwards.

Summary of Contents for Omni-glide











Reviews: