DWA-2000A-SS Suspended Solids Controller
Daeyoon Scale Industry Co.,LTD.
- 12 -
You can choose the r-H (upper limit) by pressing the key nine times or the r-L (lower limit) by
pressing it ten times
The value will blink when the is pressed.
Input a value using and keys.
And press the key after inputting the data
5) Setting of analog output
-
This function sets the ceiling and floor values when SS density values are output in the analog form
You can choose 0-1 (floor value) by pressing the key eleven times and 0-2 (ceiling value) by
pressing it twelve times
The value will blink when the is pressed.
Input a value using and keys.
And press the key after inputting the data
※ The state of output can be seen by the momentary lighting of the RUN lamp in the
SS
measurement
mode.
6) Setting of cleaning output
-
This function serves to set the outputs of the electrode cleaning to be displayed outside.
