QNF-555
8
POWER SUPPLY
The device must only be plugged into an electric mains supply of 220 to 240 VAC, 50/60 Hz.
Always check that the site voltage is identical to that indicated on the device nameplate.
USING OF APPLIANCE
1. Unpack the appliance and remove all the packing materials.
Never leave the nylon packing bag, which is part of the package, within the reach of children who could play
with it.
Inspect the appliance and the accessories carefully to verify their soundness and undamaged condition. Only
perfectly sound and damage-free appliances may be connected to the electrical mains.
2. Clean the equipment in accordance with the instructions in the section “Maintenance, cleaning of the
equipment”.
3. Ensure that the food to be grated or sliced is small enough not to block the aperture of the head.
4. Before operating, place the equipment on a flat, stable surface.
5. Mount the head on the basic unit so that the filling aperture
aligns with the open padlock symbol, and then rotate it toward
the closed padlock symbol. Ensure that both locking shoulders fit
properly. In the case of incorrect placement the appliance may
become damaged, which is not covered by the manufacturer’s
liability.
Insert the selected attachment into the head so that it engages in the lower edge of
the head’s opening from inside. If necessary, rotate the attachment in a clockwise
direction.
6. After this make sure not to touch the attachment again
User's Manual for QNF-555.indd 8
User's Manual for QNF-555.indd 8
2012.10.17. 18:37:51
2012.10.17. 18:37:51
