KSCL-400
6
EN
KSCL-400
7
Please keep this instruction manual. If you give the appliance to anyone else,
you must give them this instruction manual, too!
MAIN COMPONENTS
1. Device housing
2. Glass weighing plate
3. Switch ON-/OFF and taring button
4. Measuring unit selection button
5. LCD-display
6. Battery holder box
7. Threaded socket housing for weighing plate
POWER SUPPLY
The kitchen scales are powered by two AAA DC 1.5V batteries, which, because of the the scales’
periodic use, automatic switch-off and low consumption, should not need replacement for an
extended time.
Notes
•
The appliance can be energised only by batteries. Neither a mains connection, supply adapter nor supply
accumulator can be used for its power supply.
•
Please use only batteries as specified in the instruction manual. Other batteries (other size or shape) cannot
be inserted in the appliance and it may become inoperable or damaged when used with batteries supplying a
different voltage.
Battery replacement
Batteries must be replaced when the icon
appears on the LCD-display.
Replace the batteries by following these instructions
1. Switch off the scales
2. Push the battery holder cover’s locking bolt slightly then remove it.
3. Remove the flat batteries, and ensure their replacements correctly match the battery holder box polarity
markings. Please be careful when doing this as the warranty does not cover damage resulting from incorrect
battery replacement.
Dear Customer,
All electrical and mechanical equipment needs to be cared for appropriately. It’s important to
note that using or storing the appliance in certain conditions may adversely affect its lifespan and
functionality. Always protect the appliance from the conditions listed below.
Using or storing the appliance in a wet, humid or damp environment can cause:
- deterioration and premature aging of the cover and electric insulation of the appliance,
- premature wearing and aging of the plastic and rubber components,
- rust and corrosion affecting electrical components and metal parts.
Using the appliance in a dusty environment or in the kitchen (where the air may be contaminated
with vapours from cooking oil or grease) can cause:
- greasy dust coatings on the mechanical and electrical elements and the casing of the appliance,
which could result in electrical contact failure or even complete breakdown, and could also
damage the plastic and rubber elements.
The effects of direct sunlight on the appliance can include:
- accelerated deterioration of the appliance casing and its plastic and rubber components,
damage to strength and other structural features. The appliance’s surface may become porous
and fragile, which may result in a safety risk.
Continuous heavy duty use may cause:
- premature structural wear and tear and premature aging of the motor due to extensive use of
the appliance, resulting from wear and tear and overheating due to continuous use.
Storing the appliance in cold or frosty environment may cause:
- damage to the plastic and rubber components; if they become fragile,
this may result in a safety risk.
- oxidation resulting from condensation, and corrosion of the metal components.
Direct and indirect heat (e.g. being too close to an oven or a heating appliance) can cause:
- damage, deformation, softening or melting of plastic or rubber parts and casing elements, or
deterioration of electrical insulation.
Following the operating instructions and avoiding any of the conditions listed above will help you
increase the lifespan of the appliance. The manufacturer is not responsible if the appliance is stored
inappropriately or contrary to these instructions. You are recommended to have the appliance
serviced regularly by an authorised engineer to keep it working for as long as possible.
Please respect the environment when the appliance reaches the end of its life. Electrical products
must not be disposed of with other residential waste because they can damage the natural world
and may be hazardous to human health. You should dispose of the appliance at an appropriate
recycling site or by using a collection service that specialises in electrical appliances.
User'sManual for KSCL-400.indd 6-7
User'sManual for KSCL-400.indd 6-7
2010.12.23. 12:04:36
2010.12.23. 12:04:36
Process Black
Process Black