HSTR-028
12
maINTeNaNCe aND CleaNINg
warning! Before cleaning, always switch off the appliance and
remove the power cable from the mains socket. wait for the
appliance to cool completely before you start cleaning. Never
immerse it in water or place it under running water.
•
To clean the handle, wipe it with a soft cloth that’s been moistened with a few drops
of mild detergent. Next, remove the detergent by wiping with a soft lint-free cloth
moistened with lukewarm water. Finally, wipe the cleaned surfaces with a dry lint-
free cloth. Take care to ensure no moisture enters the appliance. Make sure the hair
straighteners are completely dry before using them again.
•
Never use solvents (acetone, benzene, petrol etc.) to clean the appliance
because these materials could dissolve the plastic cover and damage the internal
components. Do not use harsh or abrasive cleaning agents.
•
Never scrub or scour the styling plates; this can damage the glossy surface. Any dirt
should be removed with a soft lint-free cloth.
•
The styling plates may appear slightly discoloured after long-term use. This is not a
fault and doesn’t affect the operation of the appliance. You can use purified alcohol
(isopropyl alcohol) to remove this discolouration; do not use any other cleaning
liquid. Moisten a clean lint-free cloth with the alcohol and gently wipe the surface
of the styling plates. Take care not to touch other parts or to let any moisture inside
the appliance. Next, wipe with a damp lint-free cloth and finally wipe the cleaned
surfaces with a dry lint-free cloth. Make sure the hair straighteners are completely
dry before using them again.
•
If the appliance will not be used for a longer time, after cleaning put it in a nylon bag
and store it in a dust, humidity and frost free storage place. Do not wind the power
cord around the appliance not even for storage, because bending could break or
Summary of Contents for HSTR-028
Page 1: ...1 1 2 4 3 3...
Page 61: ...HSTR 028 61 HU...
