EN
FF-12C
5
•
The manufacturer is not liable for damage resulting from excessive use, inappropriate handling, inadequate
maintenance, failure to follow guidance in the instruction manual or wear and tear from regular use. In
addition, the manufacturer is not liable for damage resulting from any part of the appliance being broken or
cracked.
Dear Customer,
all electrical and mechanical equipment needs to be cared for appropriately. It’s important to note
that using or storing the appliance in certain conditions may adversely affect its lifespan and func-
tionality. always protect the appliance from the conditions listed below.
Using or storing the appliance in a wet, humid or damp environment can cause:
– deterioration and premature aging of the cover and electric insulation of the appliance,
– premature wearing and aging of the plastic and rubber components,
– rust and corrosion affecting electrical components and metal parts.
Using the appliance in a dusty environment or in the kitchen (where the air may be contaminated
with vapours from cooking oil or grease) can cause
– greasy dust coatings on the mechanical and electrical elements and the casing of the
appliance, which could result in electrical contact failure or even complete breakdown, and
could also damage the plastic and rubber elements.
the effects of direct sunlight on the appliance can include:
– accelerated deterioration of the appliance casing and its plastic and rubber components,
damage to strength and other structural features. the appliance’s surface may become porous
and fragile, which may result in a safety risk.
Continuous heavy duty use may cause:
– premature wear of the structural elements.
storing the appliance in cold or frosty environment may cause:
– damage to the plastic and rubber components; if they become fragile, this may result in a
safety risk.
– oxidation resulting from condensation, and corrosion of the metal components.
Direct and indirect heat (e.g. being too close to an oven or a heating appliance) can cause:
– damage, deformation, softening or melting of plastic or rubber parts and casing elements, or
deterioration of electrical insulation.
In order to increase the useful life of the appliance and prevent inefficient use, avoid the occurrence
of the above faults and always follow the instructions of the operating manual; failure to observe
the above will constitute improper operation for which the manufacturer will not be liable.
EN
FF-12C User's manual.indd 5
2015.11.26. 12:24:18
