BX-12
8
MAIN COMPONENTS
1. Gear switch (SPEED)
2. Air directing switch (LOUVER)
3. Feet of the device
4. Fin
5. Front guard (air directing guard)
6. Back guard
7. Time switch (TIMER)
8. Mains cable and switch (not seen in the figure)
POWER SUPPLY
The device must only be plugged into an electric mains supply of 220 to 240 VAC, 50/60 Hz.
Always check that the site voltage is identical to that indicated on the device nameplate.
USING OF APPLIANCE
Before use
•
Unpack the appliance and remove all the packing materials.
•
Inspect the appliance and the accessories carefully to verify their soundness and undamaged condition. Only
perfectly sound and damage-free appliances may be connected to the electrical mains.
•
Before use mount the feet of the device. For that turn the device upside down, and from the back push the
rails on the feet into the notches on the bottom of the device until bumping. Before use check the appropriate
fixture of the feet.
Appliance operation
1. Place the fan onto that stable surface where you would like to use it, then connect the mains plug of the
device into the wall socket. The device can only be operated on a horizontal surface otherwise the built-in
safety switch becomes active.
2. If you wish to operate the fan without the timer, set the timer switch to the ‘ON’ position; if you wish to
use the timer as well, set the desired time period by turning the timer switch clockwise to the appropriate
position. When the timer is used, the clockwork mechanism makes a low clicking sound; this indicates normal
operation. In case the appliance is turned off sooner than the set timer would go off, please turn the switch to
the ‘OFF’ position.
User'sManual for BX-12.indd 8
User'sManual for BX-12.indd 8
2013.02.08. 14:26:11
2013.02.08. 14:26:11
