EN
BMP-4228W
5
Using or storing the appliance in a wet, humid or damp environment can cause:
- deterioration and premature aging of the cover and electric insulation of the appliance,
- premature wearing and aging of the plastic and rubber components,
- rust and corrosion affecting electrical components and metal parts.
the effects of direct sunlight on the appliance can include:
- accelerated deterioration of the appliance casing and its plastic and rubber components,
damage to strength and other structural features. the appliance’s surface may become porous
and fragile, which may result in a safety risk.
Continuous heavy duty use may cause:
- premature structural wear and tear and premature aging of the motor due to extensive use of
the appliance, resulting from wear and tear and overheating due to continuous use.
Storing the appliance in cold or frosty environment may cause:
- damage to the plastic and rubber components; if they become fragile, this may result in a safety
risk.
- oxidation resulting from condensation, and corrosion of the metal components.
Direct and indirect heat (e.g. being too close to an oven or a heating appliance) can cause:
- damage, deformation, softening or melting of plastic or rubber parts and casing elements, or
deterioration of electrical insulation.
following the operating instructions and avoiding any of the conditions listed above will help you
increase the lifespan of the appliance. the manufacturer is not responsible if the appliance is stored
inappropriately or contrary to these instructions. you are recommended to have the appliance
serviced regularly by an authorised engineer to keep it working for as long as possible.
•
If your appliance is damaged or operates in an abnormal way, immediately stop using it and take it to an
authorised service engineer for checking, repair or adjustment.
•
The manufacturer is not responsible for any damage that results from overuse, incorrect operation, incorrect
maintenance, neglecting the information given in the instruction manual or normal wear and tear. In
addition, the manufacturer is not responsible for damage caused by any parts of the appliance breaking or
cracking.
• Must not immerse the appliance in water or any other liquid! If humidity gets into the appliance, it can cause
defects, so do not use it in the bathroom or any other room where there is high humidity.
•
Attention! Should the appliance, despite your caution, fall into water or make contact with humidity in any
other way, please take it to the authorised service station and have it checked by an expert before re-using it!
We have to call your attention to the fact that if the product becomes defective due to environmental effects
like this, it will be considered as improper handling, and the manufacturer’s warranty will lapse!
•
If you do not use the appliance for a longer period of time (more than 1 month) then please remove the
batteries from the battery holder. If you do not do this, corrosive chemicals may escape from the batteries
and damage the appliance.