EN
BMP-4228W
11
3. At the end of the measurement a sound signal can be heard and the blood pressure and the pulse values
appear on the display. The measured values are automatically stored within the memory of the apparatus, as
well.
4. After measurements have been taken, the device can be shut down by pressing the “ON/OFF” button or will
automatically be switched off after 3 minutes if left unused.
Note: Wait about 5 to 10 minutes before starting a new measurement. This time is necessary for vessels to
recover their original status after measurement. Taking into consideration psychologic factors, for some
people a longer delay could be justified between two measurements.
Memory function:
After measuring, both blood pressure and pulse data will automatically be stored in the device’s memory. The
memory is able to store the last 120 measurements. When the memory is full the latest measurement data will
replace the earlier ones.
1. The memory function of the apparatus can be activated after the measurement, or with the apparatus
switched off. With pressing the START button once after the measurement, the results of the earlier
measurements can be displayed.
2. With pressing the “START” button again the data measured before can be displayed in a reverse chronological
order. You can see the symbol “No” and the number of the stored value.
To delete the data stored within the memory, first switch on the turned-off apparatus with pressing the “START”
button once, then press and hold the “ON/OFF” button until horizontal lines appear on the screen in the place of
the numbers.
DEvICE MaINtENaNCE aND CLEaNINg
• When not in use, store the device in its plastic box in a dry, dust- and frostfree place. Do not expose to direct
sunlight, or to extreme external temperatures.
• If you do not want to use the blood pressure meter for an extended time, remove batteries from the battery
compartment.
• Clean both the cover and cuff of the device with a moist fluff-free cloth, then wipe it thoroughly dry with a
dry cloth.
• Completely dry the device before using or storing it.
• In order to obtain accurate and precise measurements, check the device yearly with your doctor.
• During cleaning, never submerge the device or its cuff into water or hold under a water tap.
• Do not dismantle the device.
• When cleaning the appliance, never use solvent (acetone, benzole, petrol, alcohol, etc.) as these may solve
the casing material, or the internal parts of the appliance if they get into. Do not use cleaning agents with
coarse or grinding effect.
