AHD-2000
8
EN
AHD-2000
9
mild air temperature. To make use of this function, the snap switch must be pressed down continuously.
When the snap switch is released, the dryer will continue to operate with the air temperature set previously.
Anion generátor
When the dryer is in use, its anion generator runs constantly. During drying and combing, hair generally gets
electrostatically charged and the strands become positive. The anion generator neutralizes this effect, allowing
hair to be combed and styled easily and ensuring hair stays in place for longer.
Diffuser
You can attach the diffuser whenever you want. The diffuser directs the air from the dryer between hair strands,
reducing the pressure on outer strands caused by drying and the time necessary to dry the hair. Using the diffuser
enhances your hair’s vitality, leaving it voluminous, natural looking and easy to style.
Nozzle
You can attach the nozzle whenever you want. It can be rotated 360 degrees to direct concentrated air wherever
you need it to dry your hair.
Hanging loop
By hanging the hair dryer up by the loop, you can save space while always having the appliance at hand.
MAINTENANCE AND CLEANING
Warning!
Before you clean the appliance it must be switched off and the mains plug must be removed from
the wall socket.
Warning!
When cleaning the appliance, do not immerse it in water or hold it under running water.
•
To clean the handle, wipe it with a soft cloth that’s been moistened with a few drops of mild detergent. Next,
remove the detergent by wiping with a soft lint-free cloth moistened with lukewarm water. Finally, wipe the
cleaned surfaces with a dry lint-free cloth. Take care to ensure no moisture enters the appliance. Make sure
the hair straighteners are completely dry before using them again.
•
Never use solvents (acetone, benzene, petrol etc.) to clean the appliance because these materials could
dissolve the plastic cover and damage the internal components. Do not use harsh or abrasive cleaning agents.
•
Never remove the cover of the appliance.
•
From time to time, remove the hair collected at the air vents using a vacuum cleaner.
•
If you do not plan to use the hair dryer for a longer period after cleaning it, put it in a nylon bag and store in a
dry place, free from dust and frost.
MAIN COMPONENTS
1. Diffuser
2. Concentrator attachment
3. Handle
4. Three way air flow regulating power switch (0/1/2)
5. Cool shot switch (COOL)
6. Hanging
loop
7. Power cable
POWER SUPPLY
The appliance must only be connected to mains electricity of 220-240 V and 50 Hz.
Always ensure the mains voltage where you’re using the appliance corresponds to the value
shown on the nameplate of the appliance.
USING OF APPLIANCE
•
Unpack the appliance and remove all the packing materials.
•
Inspect the appliance and the accessories carefully to verify their soundness and undamaged condition. Only
perfectly sound and damage-free appliances may be connected to the electrical mains.
•
The construction of the hair dryer allows fast, effective hair drying and hair styling as well; at the same time
the appliance operates with low noise. The following useful features and accessories make for a comfortable
use Sliding switch to regulate air flow and temperature.
The sliding switch has 3 settings: Air flow speed can be adjusted in the following ways:
Sliding switch setting
Operating mode
0.
Turned off
1.
Medium air flow
2.
Strong air flow
Cool shot button (COOL)
When pressing the snap switch the dryer will blow mild air instead of the original high temperature air. This
function makes for comfortable use, especially for those with sensitive skin where hair is dried with the original
high air temperature, while the skin surface (brows, temple and the skin around the ears, etc.) could be dried with
User'sManual AHD-2000.indd 8-9
User'sManual AHD-2000.indd 8-9
2012.09.14. 13:08:29
2012.09.14. 13:08:29
