EN
DYON SIGMA 24 DVD
22
4.5
Connecting to TV-Signal Input
4.5.1
Connection for DVB-T2 reception or cable TV
Connect the TV signal cable (the antenna cable, for example)
to the Antenna Input Jack (RF) on the back of the unit.
After connection, switch on the device. Perform the initial
installation or press SOURCE, select DVB-T/C and perform the
station search. Please note the reception path settings.
Note on DVB-T
Whether and how many transmitters can be received
depends on the location of the device and the availability
of DVB-T transmitters in this region. DVB-T radio stations
are only available in very few regions.
Please note that when using DVB-T, a new station search
should be performed every time you change location.
Broadcast stations and their transmission frequency vary
from region to region.
Supplement to DVB-T2
This device is suitable for the reception of DVB-T2
transmitters in Germany.
Make sure DVB-T2 is available in your region. If you have
any questions, please contact our support.
Please note that you may now need a CI+ module for
DVB-T2 to receive private channels.
Public broadcasters such as ARD and ZDF can also be
seen without a module.
Attention!
The CI+ module has the corresponding
functions of a smart card already integrated. Therefore
you only need the CI+ module in Germany.
Summary of Contents for SIGMA 24 DVD
Page 1: ......
