EN
DYON Culina
25
4.5 Connecting to TV-Signal Input
4.5.1 Connection for DVB-T2 reception or cable TV
Connect the TV signal cable (the antenna cable, for example)
to the Antenna Input Jack on the back of the unit so that you
can receive television programmes.
After connection, turn on the power of the unit. Then press the
SOURCE button to select DVB-T/C mode and conduct program
selection.
Note
Whether and how many DVB-T2 channels can be
received by this device, is strongly depending on the
operational place, and the DVB-T signal strength in this
Area. DVB-T2 radio in particular is very limited and not
available in most locations
Please note that for using of DVB-T2 after each larger
local changes, a new channel search should be
accomplished. Since the frequency of the Channels may
Vary from region to region.
Note that you may need a CAM module for receiving
DVB-T2.
Attention! The CAM module has already integrated the
corresponding functions of a smart card. Therefore you
only need the CAM module in Germany.
