22-082
www.powercommander.com
2017-2019 Yamaha T-Max 530 - PCV F/I - 4
5
Install the PCV module on the left side of the fuel tank (Fig. D).
Use the supplied Velcro to secure the module. Clean surfaces with the alcohol
swab before attaching.
6
Secure the PCV ground wire to the engine using the engine side cover bolt
shown in Figure D.
7
Locate and unplug the stock Crank Position Sensor connectors on the left side
of the scooter (Fig. E).
This is a 2-pin connector pair located next to the belt cooling filter.
8
Route the pair of PCV connectors with BROWN colored wire to this area
and plug the PCV wiring harness in-line of the stock Crank Position Sensor
connectors (Fig. F).
FIG.F
FIG.E
FIG.D
Ground
Unplug
