10
Installation instructions
DX-TVM111
STEP 5 -
Option 2: Attaching the mounting hardware to TVs with irregular or obstructed
backs
1
Align the TV bracket (
A
) with the screw holes on the back of the TV.
2
Place spacers (
F
) behind the TV bracket and the washers (
E
) over the holes in the TV bracket, then insert the
screws (
D
) through the washers, TV bracket, and spacers.
NOTE
: If the hole pattern on your TV is 75 mm x 75 mm, do not use the washers (
E
).
3
Tighten the screws until they are snug against the TV bracket. Do not over tighten.
You’ll need
A
E
(4)
D
(4)
Phillips screwdriver
Screws
Washers
Spacers
F
(4)
TV bracket (
A
)
DX-TVM111_13-0525_MAN_V4_EN-A4.fm Page 10 Friday, June 7, 2013 6:58 AM
