18
Using your TV
3
Press
ENTER
.
Viewing the program guide (digital TV only)
To view the program guide:
• Press
GUIDE
on the remote control
to display the program guide.
Adjusting the volume
To adjust the volume:
• Press
VOL+
to increase the volume or
VOL–
to decrease the volume.
• Press
MUTE
to mute the sound. Press
MUTE
again to restore the sound (you can also
restore the sound by pressing
VOL+
).
Setting up the channels
The first time you turn on the TV, you should use AUTO SCAN to automatically set up the
available channels on your TV. This lets you use the
CH
–
or
CH +
buttons to go to the
previous or next channels.
To set up the channels:
1
Press
MENU
on the TV or remote control. The on-screen display (OSD) opens.
2
Press
VOL+
or
VOL–
to select
CHANNEL
, then press
CH
–
. The
CHANNEL
menu opens.
3
Press
CH
+
or
CH –
to select
RECEPTION
, then press
VOL+
or
VOL–
to select the
signal mode you want. You can select:
•
AIR
–Analog and digital antenna signals,
•
CABLE
–Analog and digital cable signals.
4
Press
CH
+
or
CH –
to select
AUTO SCAN
, then press
VOL+
to begin scanning for
channels.
The TV begins to search for, and memorize, all available TV channels. This process takes
several minutes. When the scan is complete, the lowest memorized channel is
displayed. If you press
MENU
during the scan, the scan is cancelled and the lowest
memorized channel is displayed.
