Setting up your TV
9
Setting up your TV
Installing remote control batteries
To install remote control batteries:
1
Open the battery compartment cover.
2
Insert two AAA batteries into the battery compartment. Make
sure that the + and – symbols on the batteries match the + and
– symbols in the battery compartment.
3
Replace the cover.
Notes:
Do not mix different types of batteries.
Do not mix old and new batteries.
Remove batteries when they no longer have a charge. Chemicals may leak
into the battery compartment. Battery chemicals can cause a rash. If
chemicals leak, clean the battery compartment with a cloth.
Remove the batteries if you do not intend to use the remote control for an
extended amount of time.
Do not dispose of batteries in a fire. Dispose of them as hazardous waste.
Connecting an antenna, cable TV, or
satellite TV box
To connect an antenna, cable TV, or satellite TV box:
1
Connect one end of a 75 ohm cable to the
RF OUT
jack on the
antenna or on the cable or satellite TV box.
2
Connect the other end of the cable to the
RF
jack on the back of
your TV.
Notes:
Use a 75 ohm cable to eliminate interference and noise from radio waves.
Do not bundle the 75 ohm cable with the power cord or other cables.
If the antenna is not installed correctly, contact qualified service personnel
to correct the problem.
Connecting an HDMI device
To connect an HDMI device:
1
Make sure that your TV’s power cord is unplugged and the HDMI
device is turned off.
2
Connect an HDMI cable to the
HDMI OUT
jack on the HDMI
device.
3
Connect the other end of the cable to the
HDMI1
or
HDMI2
jack
on the back of your TV.
To play from the HDMI device:
1
Turn on your TV, then press
INPUT
. The
INPUT SOURCE
menu
opens.
2
Press or to select
HDMI1
or
HDMI2
, then press
ENTER
.
Note:
You can also press
HDMI
once for
HDMI1
or twice for
HDMI2
.
3
Turn on the HDMI device, and set it to the correct output mode.
See the HDMI device’s user guide for more information.
Note:
If the external device has DVI output only, use a DVI-to-HDMI
adapter to connect to the
HDMI1
jack, then connect an audio cable to
the
VGA AUDIO
jack.
Antenna, cable TV, or satellite RF jack
RF jack
Back of TV
Back of TV
HDMI device
HDMI OUT jack
HDMI1 or
HDMI2 jack
