manualshive.com logo in svg

Dynex DX-L26-10A - 26" LCD TV, User Manual

Share
Download
Dynex DX-L26-10A - 26

Making connections

11

Connecting an antenna, cable TV, or 
satellite TV box

To connect an antenna, cable TV, or satellite TV box:

• Connect one end of a 75-Ohm, coaxial cable to the RF jack on the 

back of the TV, then connect the other end of the cable to the 
antenna or cable TV wall jack.

Notes:

• We recommend using a 75-Ohm, coaxial cable to reduce interference 

and noise that may be caused by radio wave transmissions.

• Do not bundle the coaxial cable with the power cord or any other 

cables.

• If you are using an antenna and reception is not good, contact a 

service technician to adjust the antenna.

Connecting a VCR

Note:

 If the VCR has an S-Video jack, connect the VCR using the S-Video 

jack. S-Video provides better video than standard AV. For more 
information, see “Connecting an S-Video device” on page 12.

To connect a VCR:

• Connect one end of a standard AV cable (not included) into the

 

AV1 IN

 jacks on the back of the TV, then connect the other end of 

the cable to the 

AV OUT

 jacks on the VCR.

Note: 

Cable connectors and jacks are often color-coded. Match the colors 

when you connect the AV cable.

To play the VCR:

1

Turn on the TV, then press 

INPUT

. The 

INPUT SOURCE

 menu.

2

Press   or   to select 

AV1

, then press 

ENTER

.

Note:

 You can also press 

VIDEO

 one or more times to select 

AV1

.

3

Turn on the VCR, insert a videotape, then press 

PLAY

 on the VCR.

Connecting a camcorder or game console

Note:

 If your game console has an HDMI connection, you will get better 

quality using the HDMI connection instead of the AV connection.

To connect a camcorder or game console:

• Connect one end of a standard AV cable into the

 AV2 IN

 jacks on 

the side of the TV, then connect the other end of the cable to the 

AV OUT

 jacks on the camcorder or game console.

Note: 

Cable connectors and jacks are often color-coded. Match the colors 

when you connect the AV cable.

To playback the camcorder or play the game console:

1

Turn on the TV, then press 

INPUT

. The 

INPUT SOURCE

 menu 

opens.

2

Press   or   to select 

AV2

, then press 

ENTER

.

Note:

 You can also press 

VIDEO

 one or more times to select 

AV2

.

3

Turn on the camcorder or game console, then follow the 
instructions that came with the device to play from the 
camcorder or game console.

75-Ohm coaxial cable

Wall jack

Back of TV

Back of TV

VCR

AV cable

Side of TV

Game console

Camcorder

AV CAble

Summary of Contents for DX-L26-10A - 26" LCD TV









































Reviews:

No comments

Brands by name

Popular brands

Load more brands