DVD±R/RW Writer
Hardware Installation
1. Turn off the power to the computer system.
2. Disconnect all cables from the back of your computer, and then
remove the cover from the computer.
3. Insert the writer into one of the vacant 5.25" drive bays and secure
it with screws to your PC.
In order to prevent interference between the writer and the computer,
please mount the writer using all four mounting screws.
4. Connect the 40-pin IDE cable from one of the IDE ports on the
mainboard to the 40-pin connector of your writer. Also, connect the
power
supply cable to the back of the writer.
Make sure to align and connect the red-edge of the IDE Cable to
Pin 1 on the drive.
5. If you have a sound card that can be connected to this writer, you
can connect the drive (as Audio-out) and the sound card (as Audio-
in) with a 4-pin audio cable.
4
