4. Getting started
Dynaudio Acoustics BM14S
5
Controls and connections
1
AC IN
Mains power input.
2
POWER ON (Main)
Main power switch (to switch the subwoofer manually on and off).
LED shows operation mode:
•
red
: subwoofer switched on and in mute mode
•
green
: subwoofer is activated
3
Power (Mode)
•
On
: subwoofer is permanently on
•
Auto
: subwoofer switches on when signal is detected
4
Gain
Subwoofer volume level.
5
Lowpass
Subwoofer lowpass frequency: continuously variable from 50 to 150 Hz.
6
Phase
Phase setting: phase can be set to 0° or 180°.
7
Mode
Subwoofer operation mode
LFE
or
Slave
:
•
LFE
: setting for normal use and Master use
•
Slave
: setting for second and all following subwoofers
8
Highpass
Allows cutting off low frequencies of the signal provided at the
SAT/SUB
output:
•
Flat
: signal is not processed
•
60
: cut-off frequency at 60 Hz
•
80
: cut-off frequency at 80 Hz
9
SAT/SUB (output)
Output for satellite system to be connected. This signal is processed according to
the
Highpass
setting.
10 SAT/SUB (input)
Input for full bandwidth signal. This signal will be processed according to the
Highpass
setting and provided at the
SAT/SUB
output.
11 LFE
•
LFE/Slave
: input for LFE signal
•
Slave
: output to next subwoofer if installed
Terminal pinout (sockets 9, 10 and 11)
1 = 0
2 = +
3 = –
1
2
3
4
5
6
7
8
9
10
9
10
11
Summary of Contents for BM14S
Page 1: ...BM14S Operating Guide ...
Page 31: ......
