maInTenanCe and TroublesHooTIng
SMARTRAC | OPERATOR’S MANUAL REV. 0 | 4/06/2018
25
Maintenance and
Troubleshooting
Cleaning and Disinfection
Cleaning of Apparatus
To clean, turn off the unit and unplug the power supply. Clean the unit with a clean, damp cloth. Do not use abrasive cleaners.
A small amount of mild household detergent may be used, if needed.
Cleaning Display Panel
The display panel has an anti-glare coating and should be cleaned carefully. Use a soft, dry cotton cloth, or micro fiber tissue
to clean the panel. To remove fingerprints or grease, use a non-abrasive glass cleaning agent. Apply a small amount of the
cleaning agent to a soft cotton cloth and then carefully clean the panel. Do not spray cleaner directly on the panel.
Warning Messages, Error Messages, and Troubleshooting
Self-Test
When the apparatus is turned on, it will first execute a self-test. When an error is detected (this being during the self-test as
well as during normal operation), a pop-up screen will appear on the display. When the error is displayed, all outputs will be
disabled. When this situation occurs, remove all cables. Switch the apparatus OFF and ON again. If the error reappears, stop
using the device and contact your supplier.
CAUTION
Do not spray the cleaning agent directly on the glass panel.
Do not use cleaning agents that contain strong alkalis, lye, acid, detergents with fluoride ,or detergents with ammonia.
Summary of Contents for DYNATRON SmarTRAC
Page 1: ...Operator s Manual ...
