operaTIng InsTruCTIons
SMARTRAC | OPERATOR’S MANUAL REV. 0 | 4/06/2018
15
Diagram
The center screen has five small keys located within it, one
located in each corner and one at the bottom center. These
keys offer the option to zoom in and out of the depiction, or
to move across the time line.
These keys appear when the screen is touched once in the
center.
(After a number of seconds the depiction will automatically return to
the current position in the treatment).
Sequential Programming
By pressing the “ADD” key you can add another form of
therapy. The device will ask you to enter the parameters for
this other form of therapy.
To remove part of a sequential program, start by selecting
the recycle bin on the navigation bar immediately followed
by pressing the symbol of the relevant form of therapy in the
left-hand column.
Start, Pause, and Stop Treatments
START - Start the therapy with the Start button on the
navigation bar.
PAUSE - To interrupt the treatment, press on the Pause
button on the navigation bar. This button will appear in the
place of the Start button when the treatment is in progress.
To continue the treatment, press the Start button.
To stop the treatment, press the STOP button on the
navigation bar. This will appear when the treatment is in
progress.
When the treatment is started, the STORE and HOME
buttons disappear and the PAUSE, STOP, and EMERGENCY
STOP buttons appear.
Summary of Contents for DYNATRON SmarTRAC
Page 1: ...Operator s Manual ...
