B
a
si
c C
o
n
tr
o
ls
S
p
lit
/
S
p
lit
V
o
lu
m
e
17
Split Volume
By adjusting the Split Voice volume, the balance between volumes of the Main (right) and Split (left) voices may be
adjusted.
w
When you're done adjusting, release SETUP to return to performing mode.
☞
To cancel the SETUP mode LOCK, press
LOCK
again. The buttons will turn off, allowing the piano to return to performing mode.
q
Enter the SETUP mode to adjust the Split volume.
Press and hold down
SETUP
, then use the
SPLIT VOICE VOLUME Up/Down
buttons to adjust the
Split volume. The LED will display the current value.
☞
Pressing both
Up/Down
buttons simultaneously will restore the default value (80).
☞
When the LED is showing the Split volume value, the
DATA Up/Down
buttons may be used instead of the
SPLIT
VOLUME
buttons.
☞
The numerical range of the volume is 0~100.
☞
Keep a button pressed to quickly navigate through the values.
☞
To stay in SETUP mode: The piano may stay in SETUP mode instead of leaving it once the
SETUP
button is released.
1) While in SETUP mode, press
LOCK
. The LED screen will stay where it is even if SETUP is released afterwards.
2) Pressing
LOCK
while not pressing
SETUP
will also trigger and lock in the SETUP mode.
Split
Split divides the piano keyboard into two sections, and allows the player to assign different voices to
each of the sections. For example, by using Split the melody part on the right could be played in
piano voice while the accompaniment on the left sounding in acoustic bass voice.
Using Split
q
Choose the desired main voice first.
The main voice will be assigned to the right part.
Refer to Page 13 for voice selection.
w
Press SPLIT.
The Split mode will be activated, indicated by the LED which shows current the Split voice
(left part voice) number.
e
Choose the desired Split voice (that is, the left part voice).
Refer to Page 13 for voice selection.
☞
Default Voice
: 8 -1 Acoustic Bass
