Layer
B
a
si
c C
o
n
tr
o
ls
L
a
y
e
r /
L
a
y
e
r V
o
lu
m
e
16
Layer allows the player to sound two voices simultaneously when playing the keyboard.
q
Choose the desired main voice first.
Refer to Page 13 for voice selection.
w
Press LAYER.
The Layer mode will be activated, indicated by the LED which shows current Layer voice number.
e
Choose the desired Layer voice.
Refer to Page 13 for voice selection.
Layer Volume
By adjusting the Layer Voice volume, the balance between volumes of the Main and Layer voices may
be adjusted.
w
When you're done adjusting, release SETUP to return to performing mode.
☞
To cancel the SETUP mode LOCK, press
LOCK
again. The buttons will turn off, allowing the piano to return to performing mode.
q
Enter the SETUP mode to adjust the Layer volume.
Press and hold down
SETUP
, then use the LAYER VOICE VOLUME Up/Down buttons to adjust the
Layer volume. The LED will display the current value.
☞
Pressing both
Up/Down
buttons simultaneously will restore the default value (70).
☞
When the LED is showing the Layer volume value, the
DATA Up/Down
buttons may be used instead of the
LAYER
VOLUME
buttons.
☞
The numerical range of the volume is 0~100.
☞
Keep a button pressed to quickly navigate through the values.
☞
To stay in
SETUP
mode: The piano may stay in SETUP mode instead of leaving it once the SETUP button is released.
1) While in SETUP mode, press
LOCK
. The LED screen will stay where it is even if SETUP is released afterwards.
2) Pressing
LOCK
while not pressing
SETUP
will also trigger and lock in the SETUP mode.
☞
Default Voice: 6-2 (Strings)
