B
a
si
c C
o
n
tr
o
ls
S
p
lit
/ S
p
lit
V
o
lu
m
e
/ A
d
ju
st
in
g
S
p
lit
P
o
in
t
17
Split Volume
By adjusting the Split Voice volume, the balance between volumes of the Main (right) and Split (left) voices may be
adjusted.
q
Enter the SETUP mode to adjust the Split volume.
Press
SETUP
, then use the
SPLIT VOICE VOLUME Up/Down
buttons to adjust the Split volume. The
LED will display the current value.
☞
Pressing both
SPLIT VOLUME Up/Down
buttons simultaneously will restore the default value (50).
☞
When the LED is showing the Split volume value, the
DATA Up/Down
buttons may be used instead of the
SPLIT
VOLUME
buttons.
☞
The numerical range of the volume is 0~100.
☞
Keep a button pressed to quickly navigate through the values.
Split
Split divides the piano keyboard into two sections, and allows the player to assign different voices to
each of the sections. For example, by using Split the melody part on the right could be played in
piano voice while the accompaniment on the left sounding in acoustic bass voice.
q
Choose the desired main voice(right part) first.
Refer to Page 14 for voice selection.
w
Press SPLIT.
The Split mode will be activated, indicated by the LED which shows current the Split voice (left part
voice) number.
e
Choose the desired Split voice (that is, the left part voice).
Refer to Page 14 for voice selection.
☞
Default Voice
: 8 -1 Acoustic Bass
w
When you're done adjusting, press SETUP again.
This will allow the piano to return to performing mode.
Split Point determines the point by which the keyboard is divided when using Split.
While holding
SPLIT
, press the key that you wish to set as the split point. A 'bell' sound will be heard,
indicating that a new Split Point has been set.
▼
Split Point (Default F#3)
Available Split Point Range
(C2 - C7)
Adjusting Split Point
