Dynatech QUASAR-SV, Instructions For Use And Maintenance Manual

Page: 10 / 13

INSTRUCTIONS: QUASAR SV Code: DYN 64.1.06
Date: 08/11/2016 Revision: 06
7
6 TECHNICAL FEATURES
- Machine: Overspeed governor
- Model: Quasar-SV
- Manufacturing company:
DYNATECH, DYNAMICS & TECHNOLOGY, S.L.
- Range of use:
Maximum rated speed: 2.00 m/s
Maximum tripping speed: 2.33 m/s
Minimum rated speed: 0.1 m/s
Minimum tripping speed: 0.3 m/s
From
0.3 to 0.69 m/s , the Governor is UNIDIRECTIONAL
From 0.7 to 2.63 m/s , the Governor is BIDIRECTIONAL
- Rope: DRAKO STX
Diameter: 4 mm,
- Rope pre-tensioning:
Via the spring tensioner devices the following are obtained:
Minimum tension: 491N (below this tension, the contact cuts the safety line).
Maximum tension: 745 N. (The tensioner plate’s position determines this tension.)
- Pulley diameter: 120 mm
- Overspeed contact.
- Remote unlocking by default:
- Anti-creep system to comply with A3:
It is recommended to use the D-Box when using this device.
- Diverter pulley: Built in the governor.
Note: This manual displays partial information on the instructions for use and maintenance of this product. Please refer to the customer
area in Dynatech’s website in order to consult the full manual; http://customers.dynatech-elevation.com/