When NOT to use control zone features
Control Zones - Best Practices
Using the control zone feature is a powerful way to quickly adjust multiple DS8000s. In the worst case scenario
it can also be a way to inadvertently mass duplicate unwanted actions.
In general, using the link or sync mode will be most helpful when initially configuring a system.
Minor system adjustments such as raising or lowering the level of a speaker is best done in non-linked mode.
Raising or lowering soundmasking levels per zone can be done via the user friendly home screen buttons,
eliminating the need for most end users to worry about proper use of control zones.
Dynasound, Inc. 6439 Atlantic Blvd. Norcross, GA. 30071 800.989.6275
Control zones
16
This would be the wrong mode for adjusting a speaker
level. For example if on the screen to the left the
speaker level was adjusted while in “link” mode, each
speaker number one would be raised for each DS8000
in the Control Zone.
1) Adjusting a single speaker.
Adjusting the distributed soundmasking levels
for a particular Control Zone illustrates the
convenience of linking controls together. On
networked systems that use the local generator/
equalizers in the DS8000s is it beneficial to tune/
adjust them in mass.
6) Adjusting distributed masking generators per
Control Zone.
Summary of Contents for DS3002
Page 2: ......
