DS3002, DS3008 and DS8000 processors have similar soundmasking, input and output processing and controls. The
appearance of the screens varies depending on which of the three devices you are connected to.
Dynasound, Inc. 6439 Atlantic Blvd. Norcross, GA. 30071 800.989.6275
DS3002 / DS3008 Inputs
Select Input Manager by clicking the input button to access level controls, equalizers and compressors for each
input channel. Use the drop-down list or touch screen buttons to change between input channels. The incoming
signal may be either a line level input or a CobraNet audio input. The Input Manager does not route signals to any
given output. Mixing and output routing is done with the Output Manager.
DS8000 Inputs
Inputs
Shown on the left is the Input manager as it appears when connected to a DS8000. The view on the bottom is the
Input manager as it appears when the user selects either input 7 or input 8. These two inputs are linked allowing
A and B broadcast soundmasking to be adjusted together. EQ of the broadcast masking is done at the DS3002,
DS3008 level.
The input manager is used to process the incoming audio signals,
such as paging or music. The screen’s appearance changes
depending on the device being controlled. DS3002s and DS3008s
include input compressors and the option of accepting an input via
the balanced analog inputs or a CobraNet input. DS8000s always
receive input via the network.
Device Controls - Inputs, Soundmasking and Outputs
11
Summary of Contents for DS3002
Page 2: ......
