English - 37 -
11.- TROUBLESHOOTING:
Problem
Possible cause
Possible solution
After connect to 13.8 VDC
power supply and press the
[ON/OFF]
key,
the
transceiver no turn ON.
1. The polarity (+) and (-) of
the DC power cable is inverted.
2. One or more fuse is blow.
1. Connect the DC power cable
correctly (Red cable to positive
terminal and black cable negro
to negative terminal).
2. Solve the problem that the
fuse blows. Once checked and
fixed out, install a new fuse of
the same characteristics.
Cannot
change
the
frequency by rotating the
[MENU] knob or pressing
the microphone [UP] /
[DWN] keys.
The transceiver is under call
channel mode.
Press the [VFO] key.
Most keys and the [MENU]
knob no operate.
1.
The
lock
function
is
activated.
2. The transceiver is in channel
display mode.
1. Disable de lock function.
2. Under channel mode, can
input the channel number. The
frequency can input only under
VFO mode.
Cannot select a memory
channel by rotating the
[MENU] knob or pressing
the microphone [UP] /
[DWN] keys.
Without parameters stored into
memory channel.
Store some channel into memory
channel.
No transmit when pressing
the [PTT].
1. The microphone don´t install
correctly into transceiver.
2. The Offset is out of
transmission operation range
band.
3. The busy channel lockout
function is enabled.
1. Power OFF the transceiver
and plug the microphone jack
until a “click” hear.
2. Disable the frequency Offset
function.
3. Disable the busy channel
lockout.
If it continues the transceiver problems, consult with their salesperson or Technical Service.
