- Once your inputs have been set as desired,
you can save them as your default inputs by pressing POWER off
- You can turn the ISC back on with new default settings
SAVING SETTINGS
- To select Active Audio Source, press the WINDOW button on the ISC remote
NOTE: Audio-In 1 and 2 are shared between SVideo input and Composite Video input
PC Audio input is shared between VGA and DVI video inputs
SELECTING AUDIO SOURCE
- Here you can adjust image brightness and contrast
- Also, you can change the volume and change the RGB settings of the display
1 - Press MENU to open the setup menu
2 - Press UP or DOWN to move to your desired selection
3 - Press ENTER button to highlight your selection
(selection will turn into RED letters)
IMAGE AND AUDIO MENU ADJUSTMENTS
4 - Once highlighted, use LEFT / RIGHT arrows
to change your selection
5 - Press ENTER to go back to setup menu selections
6 - Press MENU to exit
NOTE :