English - 9 -
6.2.- LCD DISPLAY:
Icon
Description
Battery level indicator.
+/-
Shows the TX offset direction in relation to the Rx frequency.
HI/LO
Power level indicator, “HI” = High power / “LO” = Low power.
Keypad lock.
DCS
“DCS” code is turned on.
CTCSS
“CTCSS” tone is turned on.
VOX
“VOX” function turned on.
Call function.
REV
Reverse frequency activated.
PRE
Priority scan activated.
Received signal strength and TX power.
Working frequency.
Menu.
Priority channel.
Call channel.
7.- INITIAL PREPARATIONS:
7.1.- INSTALL THE ANTENNA:
To install the antenna, insert into the “SMA” connector and rotate it clockwise until the end.
Note:
- Don't hold the antenna with the hand or don't wind the external microheadset (optional) to her to avoid a
bad transceiver performance.
7.2.- INSTALL THE BATTERY:
Install the battery in the later side of the transceiver inserting it in the down grooves and pressing it
of the up side against the transceiver until listening a “click”.
7.3.- REMOVE THE BATTERY:
To remove the battery, slip the two battery lash of the battery.
Παύλος Μεϊµάρης
Ελπίδος 34 (ΒΑΟ) Συκιές, Θεσσαλονίκη τηλ 2310.634.513, 6977.38.38.73
URL: http://www.meimaris.com -
Εmail: info@meimaris.
com
Παύλος Μεϊµάρης
Ελπίδος 34 (ΒΑΟ) Συκιές, Θεσσαλονίκη τηλ 2310.634.513, 6977.38.38.73
URL: http://www.meimaris.com -
Εmail: info@meimaris.
com
