![Dynascan DB-93M User Manual Download Page 17](http://html1.mh-extra.com/html/dynascan/db-93m/db-93m_user-manual_2548756017.webp)
English - 17 -
6.- Press the [VFO/MR] key to exit.
To activate and select rapidly the squelch level, you can also use the fast menu. Press the [MENU]
key, then press the [5SQL] key and follow the procedure above described.
11.6.- “SCRAMBLER” FUNCTION:
To turn on/off the scrambler function, follow this procedure:
1.- Press the [MENU] key.
2.- Turn the selector knob until “SCRM” (menu 006) is displayed.
3.- Press the [ENTER] key.
4.- Turn the selector knob to select 1-8 group scrambler or set it “OFF”.
5.- Press the [ENTER] key.
6.- Press the [VFO/MR] key to exit.
To select “Scrambler” function rapidly, you can also use the fast menu. Press the [MENU] key, then
press the [6SCR] key and follow the procedure above described.
Note:
- The “Scrambler” function will be automatically “OFF” if menu 31 “DUPLEX” was set “ON”.
11.7.- BACKLIGHT COLOR SELECTION:
To select the LCD backlight color, follow this procedure:
1.- Press the [MENU] key.
2.- Turn the selector knob until “LIGHT” (menu 007) is displayed.
3.- Press the [ENTER] key.
4.- Turn the selector knob to select 3 different color: Blue, orange and purple.
5.- Press the [ENTER] key.
6.- Press the [VFO/MR] key to exit.
To select rapidly the backlight color, you can also use the fast menu. Press the [MENU] key, then
press the [7LED] key and follow the procedure above described.
11.8.- “BEEP” ON/OFF:
The keypad “beep” is activated by default. To deactivate it:
1.- Press the [MENU] key.
2.- Turn the selector knob until “BEEP” (menu 008) is displayed.
3.- Press the [ENTER] key.
4.- Turn the selector knob to activate/deactivate the “beep” (ON = “beep” enabled;
OFF = “beep” disabled).
5.- Press the [ENTER] key.
6.- Press the [VFO/MR] key to exit.
To activate/deactivate rapidly the keypad “beep”, you can use the fast menu. Press
the [MENU] key, then press the [8BEEP] key and follow the procedure above
described.
11.9.- VOICE PROMPT:
With this function, you activate a voice that informs about any operation/selection
you are doing in your transceiver. To activate this function, follow these steps:.
1.- Press the [MENU] key.
2.- Rotate the selector knob until “VOICE” (menu 009) is displayed.
3.- Press the [ENTER] key.
4.- Turn the selector knob to disable or select the desired language.
Παύλος Μεϊµάρης
Ελπίδος 34 (ΒΑΟ) Συκιές, Θεσσαλονίκη τηλ 2310.634.513, 6977.38.38.73
URL: http://www.meimaris.com -
Εmail: info@meimaris.
com
Παύλος Μεϊµάρης
Ελπίδος 34 (ΒΑΟ) Συκιές, Θεσσαλονίκη τηλ 2310.634.513, 6977.38.38.73
URL: http://www.meimaris.com -
Εmail: info@meimaris.
com