Dynapac MF2500CM, Operating Instructions Manual

Page: 269 / 626

D 30 11
Driver's seat, type I
f To avoid damage to health, the individu-
al seat settings should be checked and
adjusted before starting the vehicle.
f After locking the individual elements, it
must no longer be possible to shift then
to another position.
-
Weight setting (1):
The relevant driv-
er's weight should be set by turning
the weight adjustment lever when the
driver's seat is unoccupied.
-
Weight indicator (2):
The set driver's
weight can be read off at the viewing
window.
-
Longitudinal adjustment (3):
Longi-
tudinal adjustment is released by actu-
ating the locking lever.
The locking lever must engage in the desired position.
-
Seat depth adjustment (4):
The seat depth can be individually adjusted. Raise the
button to adjust the seat depth. The desired position is set by simultaneously sliding
the seat surface forwards or backwards.
-
Seat inclination adjustment (5):
The seat surface's longitudinal inclination can be
individually adjusted. Raise the button to adjust the inclination. The seat surface in-
clines to the desired position by simultaneously loading or relieving it.
-
Armrest inclination (6):
The armrest's longitudinal inclination can be adjusted by
turning the hand wheel. Turning outwards raises the front of the armrest; turning
inwards lowers it at the front.
In addition, the armrests can be folded up fully.
-
Lumbar support (7):
Both the height and the extent of the convexity in the backrest
padding can be individually adjusted by turning the hand wheel to the left or right.
-
Backrest adjustment (8):
The backrest is adjusted via the locking lever. The lock-
ing lever must engage in the desired position.
-
Back extension (9):
By pulling out via perceptible detents, the height can be indi-
vidually adjusted up to a limit stop. To remove the back extension, the limit stop is
overcome with a jolt.
-
Seat heating ON/OFF (10):
The seat heating is switched on and off by actuating
the switch.
-
Seat belt (11):
The seat belt must be applied before starting up the vehicle.
f The seat belts must be replaced following an accident.
3
7
10
4
5
6
6
8
11
1
9
2