Dynapac DRP25D, Operating Instruction

Page: 73 / 100

13. Fill in new engine oil.
14. After a short test run check the oil level on the dipstick; if nec-
essary, top up to the top dipstick mark.
15. Check oil filter and drain plug for leaks.
16. Dispose of oil in an environmentally friendly way.
8.8.2 Changing the oil in the exciter housing
NOTICE!
Components may get damaged!
– Use only oil of the permitted specification
Ä
Chapter 8.4 „List of fuels and lubri-
cants“ on page 65 .
Protective equipment:
n
Working clothes
n Safety shoes
n Protective gloves
1. Park the machine on level ground.
2. Park the machine safely Ä Chapter 6.4 „Parking the machine
in secured condition“ on page 51 .
3. Clean the area around the bleeding screw (1) and filling/drain
plug (2).
4. Tilt the machine slightly towards the oil drain side and secure
it properly.
5. Unscrew the bleeding screw.
6. Unscrew the filling/drain plug and collect any oil running out.
Filling in engine oil
Fig. 59
Final work
1 2
B-692-0009
Fig. 60
Maintenance – Annually
DRP25D 73