Dynapac DRP20, Operating Instructions Manual

Page: 46 / 112

5.3 Checking the engine oil level
NOTICE!
Danger of engine damage!
– +Use only oil of the permitted specification
Ä
Chapter 8.2.1 „Engine oil“ on page 67 .
Protective equipment: n Working clothes
n Protective gloves
1. Clean the area around the oil dipstick (1).
2. Unscrew the dipstick and wipe it clean with a lint-free, clean
cloth.
3. Insert the dipstick into the oil filler socket, do not screw it in,
but pull it out again to check the oil level.
ð
The oil level must be between the “MIN” and “MAX”
marks.
4.
NOTICE!
Danger of engine damage!
– Do not fill in too much engine oil.
If the oil level is too low, top up oil to the “MAX” mark.
5. Screw the oil dipstick in.
Fig. 20
Checks prior to start up – Checking the engine oil level
DRP20 46