Dynapac DFP12D, Operating Instruction

Page: 87 / 98

8.8 As required
8.8.1 Cleaning the cooling fins and the cooling air intake openings
How dirty the cooling fins and cooling air intake
openings are depends very much on the daily
operating conditions; clean daily if necessary.
Protective equipment: n Working clothes
n
Protective gloves
n Safety goggles
1. Park the machine in secured condition Ä Chapter 6.5
„Parking the machine in secured condition“ on page 58 .
2. Allow the engine to cool down.
3. Remove dried dirt with a suitable brush from all cooling fins
and cooling air intake openings.
4.
CAUTION!
Danger of eye injuries caused by particles
flying around!
– Wear your personal protective equipment
(safety gloves, protective working
clothes, goggles).
Blow out the cooling fins and cooling air intake openings with
compressed air.
5. In case of damp or oily contamination you should consult our
customer service department.
8.8.2 Cleaning the machine
Protective equipment: n Working clothes
n Protective gloves
1. Park the machine in secured condition
Ä
Chapter 6.5
„Parking the machine in secured condition“ on page 58 .
2. Let the machine cool down to ambient temperature.
Fig. 90
Maintenance – As required
DFP12D 87