16
CA121/141 O121EN4
OPERATION/VIBRATION
Move the Forward/Reverse lever (1) forward or
backward.
Move the lever (2) to the ON position to engage vibra-
tion.
Never leave vibration on when the roller is
stationary. This may damage the surface and
the machine.
Compacting is usually done at 4–5 km/hour (6 1/2–8
mph) (normal walking speed). It is not necessary to
disengage vibration when changing the direction of
travel.
Move the lever (2) to the OFF position to disengage
vibration. Always switch off vibration before the roller
comes to a complete standstill.
Engaging the vibration
Fig. 15 Instrument panel and controls
1. Forward/Reverse lever
2. Vibration control
8. Tachometer/hourmeter
11. Rev control
OPERATION (OPTIONAL)
Operating the strike-off blade
Fig. 16 Instrument panel and controls
15. Lever
Optional
Make sure that the blade is at its uppermost
(raised) position before driving. Check the
state of the ground before using the blade.
The lever (15) has two modes.
Upward – Raising the blade.
Downward – Lowering the blade.
Lower the blade before leaving/parking the machine.
Use the blade only when driving FORWARD.
1
8
2
11
15
Summary of Contents for CA121
Page 2: ...19 ILF015WO1...
