Installation, Operation and Service Manual
LKP Series 4 Channel OEM
© 2019 DynAmp, LLC
Page x
041593O
•
Replace fuses with correct type, size and value. All channel fuses are Type MDA time
delay fuses 3AB style, 1/4” x 1-1/4” (6.3mm x 32mm). Refer to the servicing instructions
or spare parts list for more information on replacement fuses. Do not bypass the fuses
or modify the electronics. Disconnect power to the System before replacing fuses.
Failure to follow these instructions will result in intermittent operation and premature
failure and will void the warranty.
•
Metering Unit enclosure doors and module covers must be present and remain closed at
all times during operation to insure safety of personnel. A set of keys is provided for
locking enclosure doors. Only authorized personnel or technicians should be permitted
to open and service the unit.
•
Bus current must be zero when taking resistance measurements.
•
Use of the equipment in a manner not specified by the manufacturer can impair the
protection provided within.
DynAmp, LLC does not assume liability for the customer’s failure to comply with the rules
and requirements provided in this manual.
