Specifications:
Model
24 ports Giga managed switch
Standards
IEEE 802.3 Ethernet
、
802.3x
、
802.1Q
、
802.1p
、
IEEE802.1Dand 802.3ab
Ports 24
1000Base-T
ports
Cable
10BASE-T
：
Cat 3 or above UTP and STP
100BASE-TX
：
Cat 5 UTP and STP
1000BASE-T
：
Cat 5 UTP and STP
MAC address
8K
Backbone width
48G
Transmission rate
10Mbps
：
14880pps
；
100Mbps
：
148800pps
；
1000Mbps
：
1488000pps
10/100M Link/Act
LED
other Power
Size (L
×
W
×
H)
(mm)
440
×
285
×
44
Environment
Working temperature
：
0
℃～
40
℃；
Humidity:10
％～
90
％
Store temperature
：
-40
℃～
70
℃；
Humidity: 5
％～
90
％
Power
Input
：
180-260VAC
，
50-60Hz
；
Step 1 Installation
The site where you place the switch may greatly affect its performance. When
installing, take the following into your consideration.
1.1 Installation method
Follow the guidelines below to install the switch.
Install the switch in a fairy cool and dry place. See the Technical Specification for the
acceptable temperature and humidity operation ranges.
Install the switch on a sturdy, level surface that can support its weight,(at least 4KG).
Connect the power cord to the switch and the power outlet. The distance is no more
than 150cm.
Leave at least 10cm(about 4 inches) of space at the front and rear of the switch for
ventilation.
1.2 Desktop or shelf Installation
When installing the switch on the desktop or shelf, please attach the rubber feet to the
switch. Peel off the protective paper on the pads and attach them on the bottom of the
switch(one at each corner).
1.3 Rack Installation
The switch is rack-mountable and can be installed on an EIA-19 inch equipment rack.
To do this, first install the mounting brackets on the switch’s side panels(one on each
side), secure them with the included screws, and then use the screws provided with
the equipment rack to mount the switch on the 19 inch rack.
Dynamode Ltd
