III. Driver Installation
This section describe the driver installation process. Follow the instructions step by step to complete
the driver installation.
Step 1 : Power on your Computer.
Step 2 : Plug the ADSL line to the
“LINE”
Port of your ADSL Modem.
Step 3 : Insert the Square end of the USB cable into the
“USB”
port of the USB ADSL
Modem.
Step 4 : Insert the Setup CD-Title into your CD-ROM drive. The following Setup Wizard
will pop-up. Click
“Driver Install”
and follow the on-screen instructions to
complete the driver installation.
It is strongly recommended that you use the Setup CD provided to install
the USB ADSL Modem.
Insert the Setup CD into the CD-ROM drive before connecting your USB
ADSL Modem to your computer. Follow the on-screen instructions to
complete the installation.
!
ADSL USB MODEM P4
