Dynamite Vision Peak 2, Instruction Manual

Page: 2 / 3

Once the battery has peaked, the charger
will automatically switch to trickle charge.
This feature will make sure that the
battery is fully charged when you are
ready to use it. You will know that the
charger has entered trickle when the
charger repeatedly beeps, and the LED
continuously flashes.
The battery pack will remain on trickle
charge until you either re-peak the pack
by pushing the Start/Select button or
disconnect the pack.
To re-peak a battery, keep the battery
attached to the charge lead and push the
Start button. Do not unplug and reattach
the battery prior to re-peaking. This will
cause the battery to over-heat.
A voltmeter jack is provided on the face-
plate of the Vision Peak
™ 2, allowing you to
monitor the voltage level of the battery
pack. Simply insert the voltmeter’s leads
into the respective positive and negative
jack and set the meter to display voltage.
The Vision Peak ™ 2 uses a 2-amp fuse. If
you need to replace the fuse, unscrew the
fuse cap and replace it with a fuse of the
same rating. Replacement fuses (DYN4004)
are available from Dynamite
® . You may
also find a replacement fuse at your local
auto supply store.
• Do not leave the battery and charger
unattended while in use.
• Always allow the charger to cool between
charge cycles.
• Never attach the charger to an AC and
DC power source simultaneously.
• While charging, constantly monitor the
temperature of the battery pack. If the
battery becomes hot, discontinue the
charging operation immediately by
disconnecting the battery pack.
• Carefully observe connector polarities
at all times.
• Children charging battery packs should
be supervised by a responsible adult.
This charger is guaranteed against work-
manship and manufacturing defects for a
period of 5 years from the original date of
purchase. This warranty is limited to the
original purchaser and is not transferable.
Warranty repair will not cover units that
have been modified, misused or serviced
by an unauthorized service center.
To speak to a service technician, call
877-504-0233.
If this charger needs to be repaired, ship
the charger in its original box (freight
pre-paid) to:
Horizon Service Center
Attn: Dynamite Service
4105 Fieldstone Rd.
Champaign, IL 61822
Include a brief summary of the difficulty.
Date your correspondence and be sure
that your name and address appear on
this enclosure. Also, please include a
phone number where you can be reached
during the business day. Include your
complete name and address and informa-
tion inside the carton, as well as clearly
writing it on the outer label and return
address area.
To receive warranty service, you must
include your original sales receipt verifying
proof-of-purchase date. Providing warranty
conditions have been met, your charger
will be repaired free of charge.
Should the repair cost exceed 50% of
the retail purchase cost, you will be pro-
vided with an estimate advising you of
your options. Any return freight for non-
warranty repairs will be billed to the
consumer.
For non-warranty repairs, please
advise us of the credit card you prefer
to use. Horizon Service Center accepts
money orders, Visa or MasterCard.
Please include your card number and
expiration date.
Warranty Repairs
Non-Warranty Repairs
Warranty and Repair Policy
Safety Precautions
Voltmeter Jacks
Changing the Fuse
Re-Peak
Trickle Charge
5898
Dynamite
®
is an exclusive brand of Horizon Hobby, Inc.
©2003 Horizon Hobby, Inc.
4105 Fieldstone Rd., Champaign, IL 61822
www.horizonhobby.com