Before Use
This massage chair may be packaged with the backrest folded. If so and
before use, please raise up the backrest.
Please carefully and thoroughly follow the instructions for assembling the massage chair.
Before operation and if not already in the upright position, the massage chair back will
need to be put to the upright position using the controller. If the backrest cover is not
already zippered onto the backrest of the massage chair, then you will need to install it.
You can do this by attaching the backrest cover using the zippers on the left/right side
and the top of the backrest of the massage chair.
When using the massage chair, do not operate the massage chair in a humid
environment. Be sure not to drastically change the room temperature in which the
massage chair resides. Drastic changes in room temperature can lead to rusting of the
metal parts and greatly affect the operation of the massage chair causing damage.
Massage Chair Placement
–
Please be sure to have a clearance in front and behind the
massage chair of approximately 20”/50 cm to prevent it from touching any objects or
walls in the declined position.
Over 20”/50cm
Over 20”/50cm
o
Do not use the massage chair in the bathroom or any other humid
environment.
o
Make sure the massage chair is assembled and operated on a flat level,
non-slippery floor.
o
Do not use the massage chair in dusty and high ambient temperature
environments. The ambient room temperature needs to be below
104
o
F/40
o
C.
o
Do not place the massage chair in direct sunlight or near heating
equipment.
o
Do not smoke or operate the massage chair near any open flames.
-9-
