FIG 6
Assembling Roof Panel
7.
Connect all the wires and connectors to the corresponding outlets on the Roof
Panel. Be sure that all the plugs are connected snug and tight.
(see FIG-7)
FIG-7 Connecting cords/wires connectors
6.
It is now time to install the door handle, bench heat emitter panel and bench. Locate
the door handle and screw it to the glass door. Next, will need to place the left side
of the bench heater panel into the vertical wood planks on the left side panel and
bring the right side forward as seen in FIG-8. After installing the bench heat emitter
panel, you can connect the heater cord. Next, you can slide the bench over the top
of the bench heat emitter panel. Be sure to slide the bench all the way back against
the rear panel. Use the provided screws to secure the bench in place.
(see FIG-8)
FIG-8 Assembling Bench Heat Emitter Panel & Bench
Page 10
