10
3) When you get the DVMR, you can enter
into Setup menu by just pressing
[ENTER] button.
1) Press [MENU] button to enter the
system menu after starting the system.
2) DVMR system asks you to enter password
to verify authority of user as shown on the
left.
Factory default password is [ENTER]
NOTICE
: We recommend you to enter your own password as per procedure in
PASSWORD SETUP/MISCELLANEOUS SETUP of setup menu.
6) After entering to setup menu, press [MENU] button to go back to the system menu.
If password entered matches previously set password,
“
PASSWORD OK
”
message appears and you
can enter into SYSTEM SETUP.
If password entered does not match previously set password, DVMR system just go back to initial mode,
that is, showing live pictures and recording as set before.
ENTER PASSWORD : ________
INPUT YOUR OWN PASSWORD,
THEN PRESS [ENTER]
TO EXIT, PRESS [MENU]
Enter the password
default P/W : [ENTER]
1
Input or modify
2
NOTICE
: Be sure to memorize the changed password.
In case you forgot password, you can not enter into SYSTEM SETUP and can not
change parameters of DVMR operation, and just leave DVMR unit to run as settings you
done before. In case you forgot own password and want to enter into SYSTEM SETUP,
please contact dealer to get instruction for entering into SYSTEM SETUP for password
change.
Login DVMR SYSTEM
4) In case you already have changed the
password, enter your own password.
ALL ABOUT IMAGE RECOGNITION & PROCESSING
8 channel stand-alone DVMR
3. Operation
21
ALL ABOUT IMAGE RECOGNITION & PROCESSING
6. HDD MANAGEMENT
Press [ENTER] button when half-tone green bar is on
HDD MANAGEMENT.
HDD MANAGEMENT
HDD CLEAR [ IN USE ]
HDD INFORMATION
CD-R BACK UP
HDD MANAGEMENT
SELECT
, PRESS ENTER
1) HDD CLEAR
When DVMR system started to record and hard drive has
data of pictures recorded, “IN USE” is displayed in square
brackets.
You are strongly requested to clear data on hard drive,
when you first install hard drive or you add second hard
drive, whether it is used one or brand new one after
setting at FACTORY DEFAULT.
2) HDD INFORMATION
Press [ENTER] button when half-tone green bar is on HDD MANAGEMENT to enter into HDD
INFORMATION.
If you want to delete all data on hard drive, press
[ENTER] when half-tone green bar is on “HDD CLEAR”.
Then DVMR system asks you to enter password.
Enter password and press [ENTER], and “EMPTY” is
displayed in square brackets.
In HDD INFORMATION, you can have information of HDDs as follows.
- Date of detecting HDD
- Drive number from 1 to 22
- Manufacturer and model of HDD
- Capacity(GB) of HDD detected
7. MISCELLANEOUS SETUP
Press [ENTER] button when half-tone green bar is on
MISCELLANEOUS SETUP.
BUZZER SETUP
ALL BUZZER ---
KEY BEEP ON
LOSS EVENT OFF
ALARM EVENT ON
MOTION EVENT OFF
BUZZER SETUP
SELECT
, EDIT ENTER /
1) BUZZER SETUP
In DVMR system, we can set buzzer “ON” or “OFF” for
key, video loss, alarm event, and motion event
independently, in BUZZER SETUP.
Or you can set all of them at “ON” or “OFF” by setting
ALL BUZZER at “ON” or “OFF”, by pressing [ENTER}
button.
In MISCELLANEOUS SETUP, we can set parameters for
buzzer, alarm, timer(time interval), pan/tilt command, baud
rate of RS-485, and password.
To save settings and exit, press [MENU] button.
8 channel stand-alone DVMR
3. Operation
3-1. DVMR SYSTEM log-in
Chapter 3. Operation
5) Press [ENTER] button after you enter password, to enter into SETUP menu.
3) CD-R BACKUP
Press [ENTER] button when half-tone green bar is on CD-R BACK UP to back up the recorded
data. For more details, please refer to the attached GuideLine paper for this function.
